- Three electrode test cell
- electrolysis cell
- Continuous flow electrochemical reactor
- Spectroscopy, photoelectric-electrochemical combined test cell
- Electrochemical test electrolysis device
- Proton conductivity test platform
- Corrosion cell
- SPE electrochemical reactor
- Electrochemical chlorine generator
- Constant current and voltage regulated DC power supply
Product name Working electrode
(1) Glassy carbon electrode / HZCGC:
Imported glassy carbon, diameter 2mm, 3mm, 5mm, etc.
L-shaped glassy carbon electrode and other glassy carbon diameters can be customized.
(2) Other disk electrodes
Ag disk electrode: diameter 2mm, 3mm, 5mm, etc.
Pd disk electrode: diameter 2mm, 3mm, 5mm, etc.
Au disk electrode: diameter 2mm, 3mm, 5mm, etc.
Pt disk electrode: diameter 2mm, 3mm, 5mm, etc.
Others such as Cu, Ti, etc.
A full set of polishing materials: including thick and thin sandpaper, suede, alumina powder of different particle sizes
Electron microscope electrode, different materials, shape, diameter and other requirements can be customized
2. platinum wire electrode clip
The electrode clip is mainly used as the support and conductive connection of the sheet electrode. The relevant electrochemical reaction of the electrode clip itself in the system should be avoided so as not to interfere with the target electrochemical reaction; the end of the platinum wire electrode clip (that is, the fixed end) is 99.99% The purity of the platinum wire is in contact with the diameter of the electrode of the experimental sample and is fixed by fastening screws; the length of the platinum wire electrode clamp is 85mm, the rod outer diameter is 7.5mm, and it is made of polytetrafluoroethylene. It is widely used as a sheet electrode in electrochemical test experiments Support.
Can be customized according to customer requirements.
3. Powder microelectrode
In order to study the electrochemical characteristics of powder materials, microelectrodes are often made, and the powder materials are filled into the pits of the microelectrodes to make powder microelectrodes, and then related electrochemical behavior tests are performed.
The pore size of the micro-electrode can be selected according to the customer's requirements, there are 50um, 5um, etc.